Manufacture of INNO Tempered Glass

INNO Tempered Glass is a heat toughened safety glass. It has under gone a special heat treatment to increase its strength and resistance to impact. As a result, tempered glass is approximately five times more resistant than normal glass. As an example a piece of 8mm toughened glass will be able to withstand a steel ball weighing 500gr dropped from a height of 2 meters.

Features of INNO Tempered Glass

Under wind pressure, tempered glass is approximately four times as strong as annealed glass. It resists breakage by small missiles traveling approximately twice as fast as missiles which break annealed glass. Tempered glass is also able to resist temperature differences (200° F – 300° F) which would cause annealed glass to crack.

		Annealed Glass		Tempered Glass
Typical Breaking Stress (large light 60 sec. load)		6,000 psi		24,000 psi
Typical Impact Velocity Causing Fracture (1/4″ light 5 gm missile, impact normal to surface)		30 ft/sec		60 ft/sec

Applications of INNO Tempered Glass

Fully tempered glass is used in many applications because of its safety characteristics. Safety comes from strength and from a unique fracture pattern. Strength, which effectively resists wind pressure and impact, provides safety in many applications. When fully tempered glass breaks the glass fractures into small, relatively harmless fragments. This phenomenon called “dicing,” markedly reduces the likelihood of injury to people as there are no jagged edges or sharp shards.

Interior Decoration ,Windows,Doors,Partitions and Home Appliance

Exterior for Buildings ,Fence Panels,Solar Panels,Swiming Pool Fence Panles

Glass can make INNO Tempered Glass

INNO Tempered glass can made by Clear Float Glass,Tinted Glass,Reflective Glass,Clear and Colored Patterned Glass,Lacquered Glass,Silkscreen Printing Glass,Acid etched Glass to get different beautiful and privacy

Different Fabrication of INNO Temered Glass

 

Cutting:

By automatic cutting platform,we can cut any shape with accurate size according to design

Mirror is also can be cutted on this automatic cutting platform

 

 

 

                                                                               

   

  Grinding:

Edge work options

 

Driiling

Accurate postion with polished ,rough holes ,diameter from 2mm to 200mm

Different treatment according to design,including rough and polished innerside

   

 

 

 

Surface treatment

High and low temperature silkscreen printing

Frosted glass by acid etched or sandblasted glass

Laquere glass,color painted

 

 

 

Please send us your design and applications ,so we can send our best offer and product to you